跳至主要内容

NAFCO | New Industry Trend of Brass Ball Valve and Brass Fittings

NAFCO | New Industry Trend of Brass Ball Valve and Brass Fittings
Time:2017-09-12 From: NAFCO-China Brass Ball Valves Fittings Manufacturer
The trend of environmental control and green developing is becoming the main theme of the future development for China Brass Ball Valve and China Brass Fittings industries. Traditional brands that rely on low price will be a history gradually. It needs to break existing mode so as to root in market.

1. The original development mode at the expense of environment is not conforming to development requirements.
In the past, increasing GDP at the expense of environment will be forced to drive away from the market. High profits with low price disappearing gradually that will make traditional brand have a process of adapt and adjust. However, development is the trend, who adjust fast, who will master the initiative. The heavy pollution production process of brass ball valves and brass fittings, such as brass melting and material production, plating of brass valve surfaces, have much negative effects on environments.

2. Messy small company will be knocked down by overcapacity and supply-side reform.
The talent of saturated, competition of low price and repeat production caused waste of resource; messy small company will forbid gradually, thus have a huge impact to market and consumer. Because of market and consumer still not adapt the process of adjustment. But this is the trend of future development, the traditional brand needs to adjust the strategy in time and adapt the change initiatively. There many small-sized brass ball valve manufacturers and brass fittings producers in China need to improve.

3. The market needs high quality brass valves and brass fittings.
 Good-value and high quality brass valves and brass fittings will become the competitive product in the future. To create the competition of brand requires optimize the product line continuously. Providing good-value products is the important means to win market and users.

4. Small company will no longer be a competitive advantage.
Due to the cost reasons, small brass ball valve company can master certain initiative in the competition. However, with the alter of market situation, who can adapt the competition, adjust the product constantly, research and develop the brand will have stronger advantage. And that scale enterprise have certain advantage on research and develop , technology, etc. If they can develop creativity, they will win the initiative in the market competition

5, Innovation-driven becoming the new normal of traditional brand development.
Innovation-driven fit for industrial mode of 4.0 that is the driving force of traditional brand’s continuous progress. In the fierce competition, you will be knocked out gradually without active innovation and adapt to market. It will be helpful for long term development of China Brass Ball Valve and Brass Fittings inudstry.
China Brass Ball Valves
More articles of brass valves that you may be interested:
 
 

评论

此博客中的热门博文

NAFCO | Brass Gate Valve Installation

NAFCO | Brass Gate Valve Installation From: NAFCO | China Brass Valves Manufacturer 1. The installation of the gate valve must be carried out by qualified operators. The deviation of the different axial directions of the two ends of the pipeline must not be too large, otherwise excessive pipeline installation stress will be generated, resulting in failure and damage. The thread precision and effective length strictly enforce the ISO228-1 relevant standards.    When installing the screw, the hex or octagonal part of the same side of the thread should be clamped. The hexagonal or octagonal part of the other end of the valve should not be wrenched to avoid deformation of the valve. It must be made of Teflon tape or thread sealant seal.     2. To install the tightening valve, you must use the corresponding torque wrench or pipe wrench, and screw in the effective thread length. Do not excessively cause the inner end surface to be pressed, causing the s...

NAFCO | 5 Negative Changes of China Brass Valve Industry in 2017

1, Sales decline, weak growth In the era of overcapacity, plumbing valve industry oversupply, the valve industry innovation, change lag, in the growth encountered bottlenecks and ceilings, if the business no new growth point, the major brand sales decline is a common phenomenon. 2, Price war The market demand for brass valves is red uced, in order to seize the market, each brand competition bargain, businesses profit are limited. The market shuffle will be inevitable.  China brass valve manufacturers  for  brass ball valves ,  brass gate valves ,  brass check valves , brass angle valves,  brass radiator valves ,  brass fittings  will face difficult time. 3, Brass Valve Industry shuffle Brass valve brand competition will become increasingly fierce in 2018, China brass valve suppliers without core competitiveness and service will be squeezed in the market. In the case of raw material prices and cost increase, non-competitive brass valve factories w...

NAFCO | Definition and Structure of Brass Gate Valves

NAFCO | Definition and Structure of Brass Gate Valves Time:2018-08-02 From: NAFCO | China Brass Gate Valves Manufacturer Brass gate valves are one of the most commonly used plumbing valves for household application, just little smaller than brass ball valves. Brass gate valve is  metal-metal sealed valve and are currently widely used in water supply systems.    Today we're going to explain what is a brass gate valve, what's the structure of brass gate valves:     1. Definition and of Brass Gate Valves   Brass gate valves, also called brass disc valves, are valves in which the closing valve disc moves in the vertical direction along the centerline of the passage, used to turn the media on or off.   The brass gate valve is a control unit that moves the gate plate along the axis of the channel in the vertical direction and shuts off the medium flow control unit through the handwheel rotation drive. The utility model h...