跳至主要内容

NAFCO | Customized Brass Fittings - 5-way Brass Distributor N30171003

NAFCO Customized Brass Fittings - 5-way Brass Distributor N30171003
https://www.acrofluid.com/Fittings/OEM-Brass-Fittings-China/China-Customized-Brass-Fittings-5-way-Brass-Distributor-N30171003.html

评论

发表评论

此博客中的热门博文

NAFCO | Brass Gate Valve Installation

NAFCO | Brass Gate Valve Installation From: NAFCO | China Brass Valves Manufacturer 1. The installation of the gate valve must be carried out by qualified operators. The deviation of the different axial directions of the two ends of the pipeline must not be too large, otherwise excessive pipeline installation stress will be generated, resulting in failure and damage. The thread precision and effective length strictly enforce the ISO228-1 relevant standards.    When installing the screw, the hex or octagonal part of the same side of the thread should be clamped. The hexagonal or octagonal part of the other end of the valve should not be wrenched to avoid deformation of the valve. It must be made of Teflon tape or thread sealant seal.     2. To install the tightening valve, you must use the corresponding torque wrench or pipe wrench, and screw in the effective thread length. Do not excessively cause the inner end surface to be pressed, causing the s...
发表评论
阅读全文

NAFCO | 5 Negative Changes of China Brass Valve Industry in 2017

1, Sales decline, weak growth In the era of overcapacity, plumbing valve industry oversupply, the valve industry innovation, change lag, in the growth encountered bottlenecks and ceilings, if the business no new growth point, the major brand sales decline is a common phenomenon. 2, Price war The market demand for brass valves is red uced, in order to seize the market, each brand competition bargain, businesses profit are limited. The market shuffle will be inevitable.  China brass valve manufacturers  for  brass ball valves ,  brass gate valves ,  brass check valves , brass angle valves,  brass radiator valves ,  brass fittings  will face difficult time. 3, Brass Valve Industry shuffle Brass valve brand competition will become increasingly fierce in 2018, China brass valve suppliers without core competitiveness and service will be squeezed in the market. In the case of raw material prices and cost increase, non-competitive brass valve factories w...
发表评论
阅读全文

NAFCO | Definition and Structure of Brass Gate Valves

NAFCO | Definition and Structure of Brass Gate Valves Time:2018-08-02 From: NAFCO | China Brass Gate Valves Manufacturer Brass gate valves are one of the most commonly used plumbing valves for household application, just little smaller than brass ball valves. Brass gate valve is  metal-metal sealed valve and are currently widely used in water supply systems.    Today we're going to explain what is a brass gate valve, what's the structure of brass gate valves:     1. Definition and of Brass Gate Valves   Brass gate valves, also called brass disc valves, are valves in which the closing valve disc moves in the vertical direction along the centerline of the passage, used to turn the media on or off.   The brass gate valve is a control unit that moves the gate plate along the axis of the channel in the vertical direction and shuts off the medium flow control unit through the handwheel rotation drive. The utility model h...
发表评论
阅读全文