跳至主要内容

NAFCO | OEM Brass Nipple Fittings with Check Core

OEM Brass Nipple Fittings with Check Core
From: NAFCO | OEM Brass Fittings China Manufacturer
As a profession OEM/ODM brass fittings manufactuer and export, we can produce according to customers' drawing or samples. Mainly focused on OEM brass fittings and brass valves, whatever requirements or idea, we can make it true for you.
We recently developed are new brass fittings for our customer, brass nipple with plastic check core, non-standard threaded, have a function to prevent back flow of fluid. Herebelow we'd like to you more details:
1.Photos of sample brass fittings
OEM Brass Fittings Nipple with Plastic Check Core
2. Front View of OEM Brass Fittings with plastic core
OEM Brass Fittings China
3. Back View of OEM Brass Fittings with plastic core
China OEM Brass Fittings
4. Front View of OEM Brass Fittings with plastic core
China Brass Fittings
5. Front View of OEM Brass Fittings with plastic core
6. Back View of OEM Brass Fittings with plastic core
Custom-made Brass Fittings China
7. Buttom View of OEM Brass Fittings with plastic core
Tailer-made Brass Fittings China

--------- The End ----------
This article is presented by NAFCO, all copyrights reserved.
NAFCO is a quality brass fittings China manufacturer and supplier, with full line of brass valves China for your selection, such as brass ball valves, brass gate valves,brass radiator valves, brass angle valves, Please don't hesitate to contact us for any questions at support@acrofluid.com. Whatever idea and requirement you have about brass fittings, we can make it true for you.

More articles of brass valves that you may be interested:

评论

发表评论

此博客中的热门博文

NAFCO | Brass Safety Valves for Water Heater

New Brass Safety Valves for Water Heater Time:2019-04-03 From: NAFCO | Brass Valve Manufacturer China As a professional brass valve manufacturer, We NAFCO always keep research and developement of new products, to meet requirements from different customers' demands and applications, representing latest technology for brass valves such as brass ball valves, brass gate valves, radiator valves, brass fittings.   We newly develpoed a new seires of brass safety valve for water heater, specially designed low pressure water system, forged brass valve body,  rating pressure 0.8MPa   Overall View:     Front Side View:   Back Side View:   Inlet Size View:   With a cross design, to stop pipes or hoses getting inside, protect the valve structure and safety     Outlet Side View: With NBR seat for better seal and avoid leakage   What is a water heater safety valve?   The water ...
发表评论
阅读全文

NAFCO | The Difference Between Brass Gate Valve and Brass Globe Valve

The Difference Between Brass Gate Valve and Brass Globe Valve Time:2019-01-02 From: NAFCO | Brass Valves Manufacturer China Brass gate valve and Brass globe valve are the two most commonly used shut-off valves. The main differences are: 1, the sealing surface is different  When the Brass gate valve is opened and closed, the sealing surface of the valve core and the valve seat always contact and rub against each other, so the sealing surface is easy to wear, especially when the valve is close to the closed state, the pressure difference between the front and the rear of the valve core is large, and the sealing surface wear is more serious. When the valve flap of the shut-off valve is in the open state, its valve seat and the valve sealing surface are no longer in contact, so its sealing surface is less mechanically worn, but if the medium contains solid particles, it is easy to damage the sealing surface. . The sealing surface of the Brass gate valve has a certa...
1 条评论
阅读全文

NAFCO | Torque Test of Brass Ball Valves

NAFCO | Torque Test of Brass Ball Valves Time:2018-08-09 From: NAFCO | Brass Valves China Manufacturer The tests described are type tests (laboratory tests) and not quality control tests carried out during manufacture. Tests shall be carried out in the sequence of this standard on the same brass ball valve. All tests shall be carried out with cold water of (20 ± 5) °C. The brass ball valve shall not be leaking or broken during the test, failing which the ball valve is not qualitified. 1.1.1 General Hold the ball valve in a rigid fixture as shown in Figure 1. a) All tests shall be carried out with connections to the valves (whatever their end fitting configurations) which are capable of withstanding the required torque values and bending moments (according to Table 1); b) if the inlet and outlet connection are not on a common axis, the torque tests shall be repeated with the connections reversed; c) ensure that the bending and torsional moments ca...
发表评论
阅读全文