跳至主要内容

NAFCO | How to Use Radiator Valves Correctly

From: NAFCO-China Radiator Valve and Brass Fittings Manufacturers China


In first place, thermal metering users should always pay attention to matters of decoration, do not change the position of the room thermostatic valves.
Radiator Valve China

Tips for installation of radiators and thermostatic valves:
1. Try not to wrap the radiators, because the radiator cooling received restrictions, resulting in a relatively slow increase in room temperature, increasing heat loss.
2. We must promptly repair if the radiator leaks which will increase heat loss.
3. As a result of polygons inside the tube caused by stagnant water circulation, affecting the heating effect, it is set in addition to the exhaust valve on the top floor, each radiator tail in accordance with the manual deflation valve, deflation action to be small, to prevent twist off To the water flow out promptly tighten the deflation valves.
RELATED: NAFCO | Installation and Use Instructions of Radiator Valves
Thermostatic Valves China
How to adjust the temperatures in energy-saving way:
1, You can save energy of radiator valves in two ways: First, raise awareness of energy conservation, proactive regulation, the second is a scientific and rational mode of adjustment.
2, During heating, residential heat user bedroom, living room (hall) and bathroom room temperature at 18 ℃ to ensure the case, the main equipment is to adjust the residential home temperature control valve, the valve has a digital scale, adjust the time scale corresponding The larger the number, the higher the temperature in the room. It is suggested that users adjust according to the following methods:
①, according to the time adjustment: at work time or no one at home, the daily outdoor temperature is higher when the temperature control valve can be properly adjusted to reduce heat consumption.
②, according to room regulation: Users can according to their own habits, proper regulation of temperature control valves.
NAFCO is a professional brass valve manufacturer China for plumbing, heating and sanitary applications, such as brass ball valve China, Brass radiator valve, brass gate valves, brass angle valves, brass check valves, brass float valves, China radiator valve, thermostatic radiator valves, China brass fittings.
In case of futher questions, please feel free to contact NAFCO at www.acrofluid.com, or send emails to support@acrofluid.com.

评论

此博客中的热门博文

OEM Brass Union Fittings for Gas Meter

OEM Brass Fittings with Union for Gas Meter From: NAFCO | OEM Brass Fittings China Manufacturer OEM produced forged brass fittings for gas meters, single-union and double-union design, sizes M20x1.5, 1/2". 1.Single-Union Brass Fittings for Gas Meters 2.Double-Union Brass Fittings for Gas Meters 2. Front View of  Single-Union Brass Fittings for Gas Meters 3. Top View of  Single-Union Brass Fittings for Gas Meters 4. Back View of  Single-Union Brass Fittings for Gas Meters 5. Buttom View of  Single-Union Brass Fittings for Gas Meters 6. Dis-assembly View of  Single-Union Brass Fittings for Gas Meters NAFCO is a professional OEM/ODM  brass fittings manufactuer and export, we can produce according to customers' drawing or samples.  Mainly focused on OEM brass fittings and brass valves, whatever requirements or idea, we can make it true for you. --------- The End ---------- This article is presented by  N...

NAFCO | Torque Test of Brass Ball Valves

NAFCO | Torque Test of Brass Ball Valves Time:2018-08-09 From: NAFCO | Brass Valves China Manufacturer The tests described are type tests (laboratory tests) and not quality control tests carried out during manufacture. Tests shall be carried out in the sequence of this standard on the same brass ball valve. All tests shall be carried out with cold water of (20 ± 5) °C. The brass ball valve shall not be leaking or broken during the test, failing which the ball valve is not qualitified. 1.1.1 General Hold the ball valve in a rigid fixture as shown in Figure 1. a) All tests shall be carried out with connections to the valves (whatever their end fitting configurations) which are capable of withstanding the required torque values and bending moments (according to Table 1); b) if the inlet and outlet connection are not on a common axis, the torque tests shall be repeated with the connections reversed; c) ensure that the bending and torsional moments ca...