跳至主要内容

NAFCO | Nominal Diameter of Brass Valves and Brass Fittings

NAFCO | Nominal Diameter of Brass Valves and Brass Fittings
From: NAFCO-China Brass Ball Valves and Brass Fittings Manufacturer
Many users and buyers are always confused and asking what's nominal diameter of brass valves and brass fittings in China, we have answers for you:
 
Nominal diameter (nominal diameter), also known as the average outside diameter, refers to the standard diameter after the standardization, the midpoint diameter between inner diameter and outer diameter, marked as DN, measured unit in mm. It's widely used to measure sizes in China brass ball valves, brass radiator valves, brass gate valves, brass angle valves.
 
For example, the nominal diameter of containers with an average diameter of 25 mm will be marked as DN25, here is an expalation for reference.
Nominal Diameter of Brass Valves and Brass Fittings China
Explanation for DN Size of Brass Valves and Brass Fittings
 
Nominal diameter and imperial unit comparison table (for valves and metal pipes)
DN Size1520253240506580100
Inch Size1/2"3/4"1"11/4"11/2"2"21/2"3"4"

PPR and other water pipe diameters and are different with valves:
PPR25, PPR32 refers to the outer diameter of the PPR pipe, larger than the nominal diameter, generally marked with De, need to be marked as "De diameter x wall thickness" form, mainly used to describe: seamless steel pipe, PPR, PVC and other plastic pipes, and other need to clear the wall thickness of the pipe.
For PPR tube, as example, with DN, De two kinds of labeling correspond to the following:
DN20 - De25X2.0mm
DN25 - De32X2.9mm
DN32 - De40X3.7mm
DN40 - De50X4.6mm

Through the data found that the two forms of expression differ by an order of magnitude, if not clear or have futher questions, please inquriy with NAFCO, to avoid losses the procurement, construction.
 
 

评论

发表评论

此博客中的热门博文

NAFCO | Brass Gate Valve Installation

NAFCO | Brass Gate Valve Installation From: NAFCO | China Brass Valves Manufacturer 1. The installation of the gate valve must be carried out by qualified operators. The deviation of the different axial directions of the two ends of the pipeline must not be too large, otherwise excessive pipeline installation stress will be generated, resulting in failure and damage. The thread precision and effective length strictly enforce the ISO228-1 relevant standards.    When installing the screw, the hex or octagonal part of the same side of the thread should be clamped. The hexagonal or octagonal part of the other end of the valve should not be wrenched to avoid deformation of the valve. It must be made of Teflon tape or thread sealant seal.     2. To install the tightening valve, you must use the corresponding torque wrench or pipe wrench, and screw in the effective thread length. Do not excessively cause the inner end surface to be pressed, causing the s...
发表评论
阅读全文

NAFCO | 5 Negative Changes of China Brass Valve Industry in 2017

1, Sales decline, weak growth In the era of overcapacity, plumbing valve industry oversupply, the valve industry innovation, change lag, in the growth encountered bottlenecks and ceilings, if the business no new growth point, the major brand sales decline is a common phenomenon. 2, Price war The market demand for brass valves is red uced, in order to seize the market, each brand competition bargain, businesses profit are limited. The market shuffle will be inevitable.  China brass valve manufacturers  for  brass ball valves ,  brass gate valves ,  brass check valves , brass angle valves,  brass radiator valves ,  brass fittings  will face difficult time. 3, Brass Valve Industry shuffle Brass valve brand competition will become increasingly fierce in 2018, China brass valve suppliers without core competitiveness and service will be squeezed in the market. In the case of raw material prices and cost increase, non-competitive brass valve factories w...
发表评论
阅读全文

NAFCO | Definition and Structure of Brass Gate Valves

NAFCO | Definition and Structure of Brass Gate Valves Time:2018-08-02 From: NAFCO | China Brass Gate Valves Manufacturer Brass gate valves are one of the most commonly used plumbing valves for household application, just little smaller than brass ball valves. Brass gate valve is  metal-metal sealed valve and are currently widely used in water supply systems.    Today we're going to explain what is a brass gate valve, what's the structure of brass gate valves:     1. Definition and of Brass Gate Valves   Brass gate valves, also called brass disc valves, are valves in which the closing valve disc moves in the vertical direction along the centerline of the passage, used to turn the media on or off.   The brass gate valve is a control unit that moves the gate plate along the axis of the channel in the vertical direction and shuts off the medium flow control unit through the handwheel rotation drive. The utility model h...
发表评论
阅读全文