跳至主要内容

NAFCO | How to Maintain Brass Ball Valve

Brass ball valves are made of brass raw materials that used to switch the flow in fluid control systems, which have obvious advantages in performance compared to traditional iron valves. Function and performance is an important factor to evaluate a product, while the maintenance is an important means to ensure a product value.
 
Manual maintenance is essential for brass valves: a good maintenance not only ensures the full performance of the valves, but also helps to extend lifetime of the valves, therefore reduces the replacement frequency and cost consumption.You may ask: "how and what maintenances can help to increase performance of brass valves?" 
 
As a professional China brass ball valve manufacturer, NAFCO researched and developed hundreds series of brass valves, with top quality valve product in China and abroad, which favored by domestic and foreign users, are pleased to share our experiences of maintaining brass valves.

1. Cleaning work
Brass valves will inevitably be contaminated with some pollutants before installing and in the process of use, because of the processing environment and the application of environmental factors. The operator shall ensure valve performance through some professional cleaning operations, especially when the higher frequency of rain, grease and so on.

2) Ancillary work
In case of long time not use, the operator shall take protective measures according to the type, structure and gland of brass valves. The main method is to use wax paper paste integrated plastic sheet to seal the valve ends to prevent dirty and pollution.

3)  Daily work
The operator may use a waterproofing device such as linoleum or raincoat to shelter the brass valves and avoid contact with the rain, when used in an open-air environment.

The above methods have been proven to be effective for brass valve maintenance. It's quite necessary to pay attention to the maintenance and protection of brass valve, so as to extend its lifetime.
 
Should you have further questions, welcome to visit www.acrofluid.com or contact us: mail@acrofluid.com
 
China Brass Ball Valve
 
More articles of brass valves that you may be interested:

 

评论

此博客中的热门博文

NAFCO | Brass Safety Valves for Water Heater

New Brass Safety Valves for Water Heater Time:2019-04-03 From: NAFCO | Brass Valve Manufacturer China As a professional brass valve manufacturer, We NAFCO always keep research and developement of new products, to meet requirements from different customers' demands and applications, representing latest technology for brass valves such as brass ball valves, brass gate valves, radiator valves, brass fittings.   We newly develpoed a new seires of brass safety valve for water heater, specially designed low pressure water system, forged brass valve body,  rating pressure 0.8MPa   Overall View:     Front Side View:   Back Side View:   Inlet Size View:   With a cross design, to stop pipes or hoses getting inside, protect the valve structure and safety     Outlet Side View: With NBR seat for better seal and avoid leakage   What is a water heater safety valve?   The water ...

NAFCO | Brass Gate Valve Installation

NAFCO | Brass Gate Valve Installation From: NAFCO | China Brass Valves Manufacturer 1. The installation of the gate valve must be carried out by qualified operators. The deviation of the different axial directions of the two ends of the pipeline must not be too large, otherwise excessive pipeline installation stress will be generated, resulting in failure and damage. The thread precision and effective length strictly enforce the ISO228-1 relevant standards.    When installing the screw, the hex or octagonal part of the same side of the thread should be clamped. The hexagonal or octagonal part of the other end of the valve should not be wrenched to avoid deformation of the valve. It must be made of Teflon tape or thread sealant seal.     2. To install the tightening valve, you must use the corresponding torque wrench or pipe wrench, and screw in the effective thread length. Do not excessively cause the inner end surface to be pressed, causing the s...

NAFCO | 5 Negative Changes of China Brass Valve Industry in 2017

1, Sales decline, weak growth In the era of overcapacity, plumbing valve industry oversupply, the valve industry innovation, change lag, in the growth encountered bottlenecks and ceilings, if the business no new growth point, the major brand sales decline is a common phenomenon. 2, Price war The market demand for brass valves is red uced, in order to seize the market, each brand competition bargain, businesses profit are limited. The market shuffle will be inevitable.  China brass valve manufacturers  for  brass ball valves ,  brass gate valves ,  brass check valves , brass angle valves,  brass radiator valves ,  brass fittings  will face difficult time. 3, Brass Valve Industry shuffle Brass valve brand competition will become increasingly fierce in 2018, China brass valve suppliers without core competitiveness and service will be squeezed in the market. In the case of raw material prices and cost increase, non-competitive brass valve factories w...